For this project I used wooden molds and a glass bottle (still partially embedded) to create a small concrete planter for a succulent. AdvertisementsRead more "Concrete Project"
For this project I work with fiber to create a unique embroidery design and master a few knots. I tied a Clove Hitch, Square Knot, Bowline, Figure Eight Knot, Uniknot, Taught Hitch, and an Alpine Butterfly, it was very… knotty.Read more "Project 3: Fiber Work"
For this project we were tasked with creating a gondola capable of surviving a high speed impact with a wall using recycled plastics. For my project I took a recycle smoothie bottle, made of PETE and HDPE, and cut a door on top so that I load up to three eggs in the chamber. I […]Read more "Project Two: Plastic Gondola"
To begin, this is how my first project began. A four pieces of maple glued into a block. You can see the glue and pen marks where I intended to cut. Unfortunately, this block of maple turned out to be too hard to cut very dynamically by the band saw. So, I lopped some pieces […]Read more "Project 1: Wooden Geometry"